LED Recessed round panel Light is a new model LED lighting source expecially for store ceiling lighting, room ceiling lighting, etc. It has such characteristics as lower energy saving, longer service life, higher CRI, faster response. The LED round panel light is more compact, which can perfectly achieve entire unification and harmony with the architectural ornament without any damage of the light settings embedded inside the ornament. Therefore, it can provide with free-glare, non-exposure and even more comfortable visual effect.
LED Recessed round panel Light
LED round panel light
1. Energy-saving: the LED panel light in white color is only counting for 10% of the power consumption of the incandescent light, 40% of the power consumption of the fluorescent light; Its service life can exceed 100000 hours, so it’s more efficacious for all in home lighting.
2. High frequency using: if the fluorescent light is switched on or off at a high frequency using, its lamp filament will soon be damaged or darkened.
3. Solid-state mounted: it can be transported and installed easily, no needed to care for vibrating. The main concern is heat diffusion.
4. With the rapid development of science and technology, LED panel lights for store room has made a great achievement on the luminous efficiency and cost.
5. Environmental protection: the LED panel light is free from mercury or toxic material and will reduce waste to a minimum. In addition, they are made entirely of recyclable material, so they impact on the environment is minimal.
6. Fast response: it has fully avoided the main defect of the traditional HPSL - a longer starting time.
Details of LED recessed round panel light for ceiling
Model of LED
Application of room space
Lamp size (107mm)
Lamp size (116mm)
Lamp size (140mm)
Lamp size (170mm)
Lamp size (200mm)
Lamp size (225mm)
1. For hotel & restaurant
It can not only make people feel more comfortable and luxurious, but also can make energy saving.
2. For Living room & home theater
By adopting its lighting color and brightness from the LED panel light, it can offer a warm, casual, harmonious and peaceful atmosphere.
3. For museum, gallery & exhibition
Lighting for places such as museum, gallery & exhibition is in need of superior lighting effect which must fit with the particularity of the objects on display, no UV & heat radiation. The LED panel light is a cold light source, which can fulfill the specific requirements of the lighting for museum, gallery and exhibition.
4. For meeting room, function room
Intelligent controlled LED panel light is adjustable to the brightness, which can satisfy the requirement for different purpose or atmosphere.
5. For luxury exclusive shop, shopping mall & store room
LED panel light is designed to give you the best possible lighting performance such as local lighting, ceiling lighting or area lighting whilst at the same time providing you with a cost effective, environmentally friendly product. Some of them equip with its own driver, and use main standard input voltage. This is a maintenance free light fitting that once installed will give you 50,000 hours of money and energy savings and eliminates the need to replace any bulbs. This panel light will save you hundreds of dollars on your electricity bill and will look great in any room.
LED Recessed Round Panel Light for exclusive shop
LED Round Panel Light for exclusive shop
LED Recessed Round Panel Light for shopping mall
1. The hole-cutting size on ceiling for the panel light embedded must be similar.
2. Power supply to AC220V.
3. Insert into the hole of ceiling with its spring lock erected.
1. It’s necessary to read the instruction carefully before installation; please make sure the electricity has been cut off before installing indoor lamps; and all outdoor lamps must be installed by skilled or professional electrician.
2.It’s necessary to check if the product is in a good condition while unpacking.
3. It’s necessary to keep a distance of 200m from the inflammable materials at least and of 20mm space from the ceiling. It is not allowed to mount all lamps inside the ceiling or beside wall with heat source. It should be paid attention to the separation of wiring in low voltage and high voltage.
4. All wires connecting to the lamp must be fixed securely.
5. It’s necessary to keep enough length of the wire to the lamp for avoiding the tie knots or too much tension while wiring. It should be paid attention to the wiring of input and output.
6. After installation the lamp should be connected to switching power supply with low voltage.
7. All products must be disassembled or maintained by professional electrician. We have the right for no replacement or warranty if any disassembling or maintaining activities have been done without permission.