Linear LED Light Bar consists of LED sources, controlling device(e.g. Power driver), light diffuser and aluminum housing; The LED sources is composed of LED chips in a single row or double row, the effective radiation length is much larger than its effective radiation width.
1. LED strip light is composed of high quality aluminum profile, LED strip or LED bead with lens. 2. Green protection for the LED sources, which doesn’t make any harmful UV rays; therefore it is more suitable for antiquity illumination and medicine display window;
3. Higher efficiency and energy saving 65% than that of the traditional CFL.
4. A longer service life for the LED lamp.
5. More reliable and safe for working under low voltage supply.
LED strip light is by means of clips or screws installed or mounted on the surface of the object relevantly, which is different from the installations of LED strip tape or LED strip bar.
2. Viewing angle:
LED strip light’s viewing angle varies from type or design of the aluminum profile, so as to be able to reach the optimal illumination effect.
3. Jointing part:
LED strip light can achieve juncture without any dark space by adjusting the position of end caps, housing material, length of strip light and jointing position, so as to meet the customer’s requirement to a large extent.
4. Surface treatment:
Its outer color can be adjusted by the customer’s requirement.
1. For High-end hotel & restaurant, KTV, pub, club, counter, etc.
2. For jewelry cabinet, cosmetic cabinet, boutique window, wine cabinet, antique display window, medicine cabinet, saloon desk, supermarket showcase, etc.
3. For Automobile decoration, construction decoration, building wall decoration, advertisement decoration, characters & symbol, entertainment ground, theater, public lighting project, etc.
For double row light
Packaging & Delivery:
1. It includes a cable of 300mm in length for wiring if without any prior notice.
2. Its packaging can be customized according to its size and shape.
1. First of all, It’s necessary to equip with a matched power supply to each lighting bar and make sure there is no damage or tear during transportation.
2. After inspection without problem, then it is necessary to fix clips by screws in a sunk tunnel.
3. Then fasten the strip light through clips carefully and smoothly.
4. Next make sure if the wiring connection is performed in good condition(In consideration of the power consumption that the cable for wiring is taking, it is recommended that the total power of the strip light shall not exceed 80% of the rated power of the DC power supply and a single DC power cable shall not exceed 3m in length for fear of overloading and damaging the power supply during running.
5. And it is necessary to wrap up the unused connectors with waterproof tape for fear of short circuit and then to connect to the switching power supply (specially for LED strip light.)
6. For the personal safety it’s not allowed to run with electricity if the above-mentioned steps have not been done properly.
7. It includes aluminum housing for heat sinking, which can fully meet the requirement of heat sinking from the light; However if it is being used under dusty condition, it is suggested to clean the dust regularly in order to prevent the dust from covering the heat sink and affecting the capability of the heat sinking.
8. The light body is composed of two parts: the one part is aluminum housing for heat sinking, the other is diffusing cover; During installation & operation, It is necessary to prevent the smoke, moisture, dust medium from contacting or interfering the light. If the light is being worked under these conditions, it is necessary to give a proper protection accordingly.
9. If you have any trouble during installation or operation, do please contact us timely for troubleshooting.
1. While the LED lamp is not to TURN-ON, it’s necessary to check if the circuit is connected in a good condition and if the wiring to the positive and negative electrode is correct; or if there is a split between the LED welding spots and the copper foil because of a large bending angle during the installation & operation; or if the LED chip is broken or torn while installation and delivery.
2. While the LED lighting is dark, it is necessary to check if the rated power of the power supply is less than the total power of the LED strip light; or to check if the cable for wiring is too thin.
3. While there is a luminance difference from the beginning to the end part of the LED strip lights, in a state of darkening gradually, please check if the cable for series connection exceeds the length for wiring stipulated.
4. if any problem happens while running or installation, do please contact us immediately!